Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterNew Door Installation in Los Angeles, CA
New garage door installation in Los Angeles typically costs $1,100 – $2,600 for a standard single door and $2,200 – $4,500 for a double door, including labor, haul-away of the old door, and basic hardware. Most installations are completed in one day, usually 4 – 7 hours on site. If you’re replacing a door that’s dented, sagging, or 15+ years old, a new door is often cheaper over five years than repeated panel and spring repairs. At Bramwell Garage Doors Los Angeles, we give you a written price before any work starts, show up in the window we promised, and back every installation with the 365-Day Done Right Promise in writing. Call us at (213) 996-0290 and a live person answers, day or night.
New door installation is the heavier, more permanent cousin of a spring or opener repair. Where a repair keeps your existing door running, an installation replaces the entire panel system, sometimes the Garage Door Installation in Los Angeles job also includes new track, new torsion springs, and new weatherstripping. The reason it matters as a separate service is simple: a new door changes the look of your house, the temperature in your garage, and the noise you hear every time the door opens. Done right, it’s a 15 – 20 year decision.
Marcus Ellery and the Bramwell team know what Los Angeles weather and street conditions do to garage doors. Salt air near Playa del Rey rusts hardware faster. The dry heat in the Valley bakes and cracks wood-composite doors within a decade. And homes built before 1990 often have non-standard opening heights that need custom track adjustments. We plan for those specifics before the door arrives, not after.
When You Need New Door Installation
Not every damaged door needs replacing. Here’s when it makes sense:
- Visible structural damage: A bent panel, a cracked section, or a door that visibly sags on one side. In Los Angeles, this often happens after a car bump in a tight driveway or a hard hit from a delivery truck backing up. Once the panel geometry is off, the door fights the track every cycle.
- The door is 15 – 20 years old and repairs are stacking up: You replaced a spring in 2023, rollers in 2024, and now the opener is straining. That’s not bad luck, that’s a door reaching the end of its service life. One new installation stops the cycle.
- Rising energy bills or a hot garage: Uninsulated single-layer steel doors turn a Los Angeles garage into an oven between June and October. A new insulated door (R-12 to R-18) drops the garage temperature noticeably and protects anything stored inside.
- Noise complaints and failed insulation: Old wooden doors rattle. New doors with nylon rollers and internal bracing are dramatically quieter, which matters when the garage shares a wall with a bedroom or a neighbor’s unit in a duplex.
- Selling the home: A garage door is one of the highest-visibility curb appeal items. Real estate agents in Los Angeles routinely mention a new door in listing photos. It’s a one-day upgrade that changes the front of the house.
- Safety concerns: Doors installed before 1993 lack the photo-eye reversal system now required by law. If a child or pet is near the door when it closes, the door may not stop. New installations include current safety sensors as standard.
Our New Door Installation Process
Here’s how a Bramwell installation runs, step by step:
- You call and describe what you have: A live person answers 24/7, not a voicemail tree. We ask about the door’s width and height, whether it’s attached or detached, and what’s wrong with the current door. That gives us the right starting point for pricing.
- We schedule a real window: You get a specific arrival window, not “sometime between 8 and 5.” Our technician shows up in uniform and in a marked vehicle, and calls if anything changes.
- On-site assessment and written price: We measure the opening, check the track condition, the spring system, and the clearance above the door. Then we hand you a written price for the full job, including haul-away, before any work starts. That number does not change at the door.
- Door selection and order: We walk through material options (steel, aluminum, wood-look composite), insulation levels, window placement, and color. We carry and install major brands like Raynor, Clopay, Amarr, and Wayne Dalton, and we know which models fit Los Angeles building styles, from Mid-Century ranch to Spanish Revival.
- Installation day: The old door comes down, the new one goes up, track and springs are set, and the opener is reconnected and tested. A typical single-door installation takes 4 – 7 hours. We leave the job site cleaner than we found it, with the old door hauled away.
- Written guarantee and walk-through: Before we leave, we test the door through multiple cycles, adjust the balance, and hand you a written guarantee that includes the 365-Day Done Right Promise. If something fails inside the guarantee period, we come back and fix it at no charge.
That’s the Kingswell Way: say the price before the work, show up in the window, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails.
New Door Installation Pricing in Los Angeles
How Much Does Garage Door Installation Cost? (2026 Price Guide) - Los Angeles, CA: pricing runs a bit higher than national averages because of labor costs, permit fees in some jurisdictions, and the variety of home styles that require custom sizing. Here’s what we see in the field:
| Door Type | Typical Installed Price in Los Angeles | Notes |
|---|---|---|
| Single-car, single-layer steel | $1,100 – $1,800 | Basic 8×7 or 9×7, no insulation, standard hardware |
| Single-car, insulated steel | $1,500 – $2,400 | R-12 to R-18 insulation, quieter operation |
| Double-car, single-layer steel | $2,200 – $3,200 | 16×7 standard, two-car garage |
| Double-car, insulated steel | $2,800 – $4,500 | Insulated panels, upgraded rollers and track |
| Custom or wood-look composite | $3,000 – $6,000+ | Architectural styles, custom colors, windows |
What moves the price:
- Size and opening type: Standard 8×7 and 16×7 doors are the cheapest to install. Non-standard heights (7’6″, 8′) or widths need custom track and cost more.
- Insulation level: Single-layer doors are cheap but loud and hot. Insulated doors cost $300 – $700 more and pay back in comfort and quiet.
- Hardware and spring system: We always install new torsion springs with a new door. Using the old springs is a shortcut that shortens door life. The parts difference is minor; the lifespan difference is years.
- Haul-away and disposal: Most Bramwell installations include haul-away in the written price. If the old door has asbestos-containing materials (rare in garages, but seen in homes built before 1980), special handling may apply.
- Opener replacement: If the opener is old or incompatible, we may recommend replacing it at the same time. The opener is a separate line item, and you’ll see it on the written price before we install anything.
Every installation quote is free. You’ll get a written price before any work starts, and the invoice number matches the quote number. Call (213) 996-0290 to schedule an assessment.
FAQs – New Door Installation
How long does a new garage door installation take in Los Angeles?
Most single-door installations take 4 – 7 hours on site, and we complete the majority in one day. If the job includes opener replacement or custom track work, it may extend to a second morning. We’ll tell you the expected timeline in writing before work begins, and we show up in the window we promised. Call (213) 996-0290 for a specific timeline for your door.
Is it cheaper to repair or replace a garage door?
Repair is cheaper for isolated issues like a broken spring ($150 – $280) or a snapped cable. Replacement makes sense when the door is 15+ years old, has structural panel damage, or needs repeated repairs within a 12-month span. We’ll give you an honest read on which one makes sense, and you get a written price for either path before you decide.
Can you install a new garage door the same day I call in Los Angeles?
We do not stock every size and style on the truck, so most installations are scheduled 3 – 10 days after your on-site assessment. If your existing door is unsafe to operate, we can secure it and provide emergency repair options the same day. Call (213) 996-0290 and a live person will tell you the soonest available date for your area.
Do you install LiftMaster and Raynor garage doors?
Yes. Bramwell Garage Doors Los Angeles is authorized to service and install all major brands, including LiftMaster, Raynor, Clopay, Amarr, and Wayne Dalton. We’ll talk through which models fit your opening, your budget, and your street-facing style, then give you a written price before ordering anything.
Does the 365-Day Done Right Promise apply to new door installations?
Yes. Every Bramwell installation, including the door, track, springs, and labor, is covered by the 365-Day Done Right Promise in writing. If a covered installation fails within the guarantee period, we return and fix it at no charge. That’s not a verbal assurance; it’s printed on your invoice. Ask the technician exactly what’s covered and for how long.
Written by Marcus Ellery, Owner at Bramwell Garage Doors Los Angeles, serving Los Angeles.