Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateTrusted Garage Door Spring Repair for Los Angeles Homeowners
A broken garage door spring stops the door from opening, often at the worst possible moment. It’s the single most common repair we handle across Los Angeles, from West Adams to Eagle Rock, and the one that sends a door crashing down when it fails. A torsion spring, the heavy coil mounted above the door, does most of the lifting work. When it snaps, the door becomes dead weight. We’ve been repairing and replacing garage door springs across Los Angeles for over two decades, including our Garage Door Spring Repair in Los Angeles, and our technicians arrive in uniform, present a written price before touching a tool, and leave the job site clean. If your spring has let go, call (213) 996-0290 and a live person answers, day or night.
Garage Door Spring Replacement
Garage Door Spring Replacement means removing the broken or worn spring and installing a new one rated for your door’s exact weight and cycle count. You need it when a spring snaps, when the door starts sagging on one side, or when the spring shows visible gaps in its coil. At Bramwell Garage Doors Los Angeles, we replace both springs when one fails, because both have seen the same use and the second usually follows within weeks. Most spring replacements in Los Angeles run $210 to $400, parts and labor included, depending on spring type, cycle rating, and door size.
Warning Signs Before a Spring Fails
A spring rarely breaks silently in the middle of the night without giving notice. You’ll hear a loud bang in the garage, or notice the door feels heavier than it used to. In older Los Angeles homes with original hardware, springs often fail after 7 to 10 years of daily use.
Why We Replace Both Springs
Replacing only the broken spring leaves you with mismatched tension and a new spring that does all the extra work. That shortens the new spring’s life and means another service call soon. We quote the pair replacement so you know the full cost up front.
Styles & brands we work with
Garage Door Torsion Spring Replacement
Garage Door Torsion Spring Replacement focuses on the horizontal coil spring mounted on a shaft above the door, the system used on nearly every modern residential garage door in Los Angeles. Torsion springs store mechanical energy by twisting, not stretching, and they’re what makes a heavy double door feel light enough for a small opener motor to lift. When one torsion spring breaks, the entire door system sits unbalanced and unsafe to operate. Our Los Angeles technicians handle torsion spring replacement on doors from single-car setups in Inglewood to oversized two-car doors in Beverly Hills, with most jobs falling between $210 and $400.
Torsion vs. Extension Systems
Torsion springs sit on a bar above the door and wind up to store force. Extension springs, common on older homes, stretch along the horizontal tracks on either side. Los Angeles properties built before 1990 often have extension systems, and we convert them to torsion when the budget allows, because Garage Door Spring Repair in Huntington Park and other areas benefit from torsion springs that fail more safely and balance the door more evenly.
What Happens During a Torsion Replacement
Our technician unwinds the old spring using the proper winding bars, removes the shaft hardware, and installs a spring rated for your door’s exact height, width, and weight. The new spring is wound to factory specification and tested through a full open-close cycle before we leave. The written quote you approve before work starts is the number on the invoice.
Broken Garage Door Spring
A Broken Garage Door Spring is not something to work around. The door will not open, and if you have an automatic opener, the motor will strain and strip its gears if you try. Los Angeles homeowners hear a distinct crack or pop from the garage when a spring lets go, and the door often drops a few inches or slams if it was mid-lift. We respond to broken spring calls throughout the city, from Studio City to Garage Door Spring Repair in South Gate, and the repair usually takes about an hour once we arrive. Expect a cost of $210 to $400 for a standard broken spring repair, with the exact figure in writing before we begin.
Do Not Try to Operate the Door
A door with a broken torsion spring carries full weight on one side and half-wound tension on the other. Pulling the emergency release or running the opener can yank the cables loose and send the door off its track. Leave the door closed or open as it sits and call us.
What We Check on Every Broken Spring Call
Beyond the spring itself, we inspect the cables, drum, pulley, and bearing plate for secondary damage. A spring that breaks under tension often nicks a cable or cracks a drum. We check the full assembly and quote any additional work before touching it.
Garage Door Extension Spring
A Garage Door Extension Spring uses the older design where two long springs stretch and contract along the horizontal tracks above the door. They’re common on detached garages in Van Nuys, older single-families in Culver City, and any Garage Door Spring Repair - Bell area door that predates torsion conversion. Extension springs work fine when they’re maintained, but when one snaps it can fly across the garage if a safety cable isn’t through its center, which is why building code requires them. We inspect, replace, and convert extension systems, with spring replacement running $210 to $400.
Safety Cables Are Non-Negotiable
Every extension spring should have a containment cable running through its core, anchored to the track. If yours doesn’t, we add them as part of the repair. That cable keeps a snapping spring from becoming a projectile, and we treat it as a required part of the job, not an upsell.
When to Convert to Torsion
If your extension springs need replacing and your door sees daily use, a torsion conversion is worth considering. Torsion springs last longer, balance the door more smoothly, and fail in place instead of flying. We’ll quote the conversion honestly and let you decide.
Garage Door Spring Installation
Garage Door Spring Installation covers brand-new spring systems on newly installed doors and complete spring replacements when the existing system has aged out. It’s not just a swap; it means selecting the right spring cycle rating, setting the correct tension, and confirming the door balances at every point in its travel. In Los Angeles, sea air and coastal humidity near Venice and West Los Angeles can shorten spring life, so we install higher-cycle springs for homes within a few miles of the coast. Spring installation costs range from $210 to $400 for the work itself, with the door’s existing hardware condition factored into the quote.
Cycle Ratings and Why They Matter
Every torsion spring is rated for a certain number of open-close cycles, usually 10,000, 20,000, or 30,000. A standard builder spring lasts about 7 years on a busy door. We install 20,000-cycle springs as our default in Los Angeles because they outlast the cheap ones by nearly double for a modest upcharge, and we show you the numbers before you choose.
New Door Springs vs. Replacement Springs
Most new doors arrive with springs matched to the door’s weight from the factory. When we handle installation for a new door, we verify that pairing and adjust as needed. For replacement work, we weigh the door and size the spring to the pound, not the guess.
Garage Door Spring Adjustment
Garage Door Spring Adjustment means adding or removing tension on an existing spring to correct door balance. You need it when the door drifts down when left half open, when it slams on the way up, or when the opener strains and reverses. These are jobs we do all over Los Angeles, from Santa Monica bungalows to West Hollywood condos with shared garages. A simple adjustment on a spring that’s still in good shape costs less than a full replacement, typically $140 to $285 depending on spring type, and we always quote it in writing before starting.
Why Springs Need Adjustment Over Time
Springs lose a small amount of tension as they age, and doors get heavier as they collect modification like insulation or heavy paint. In hilly Los Angeles neighborhoods, garage floors settle and shift, which changes the door’s angle and throws off the balance. A door that’s half an inch out of true needs spring compensation.
Adjustment vs. Replacement: How We Decide
We check the spring’s coil gaps, rust, and stretch before winding it tighter. If the spring shows fatigue, tightening it just masks the problem and buys you a few months. We’ll tell you straight whether adjustment is safe or whether replacement is the honest call, and the decision always stays with you.
Brands We Service
Bramwell Garage Doors Los Angeles is authorized to service all major garage door brands, including Raynor, LiftMaster, Chamberlain, and Genie, among many others. We’ve replaced springs on hundreds of Raynor doors across Los Angeles and stock most Raynor spring sizes on our trucks, so there’s no second visit for parts. For LiftMaster and Chamberlain openers, the door balance and spring tension are what keep the opener from burning out early, and we set that relationship correctly on every spring job.
Genie systems, especially older models still running in the original homes of Atwater Village and Silver Lake, often need spring and opener adjustments together. Whether you have a Raynor, LiftMaster, Chamberlain, Genie, or any other make, we can help. Our technicians cross-reference the door model and weight to the spring manufacturer’s spec sheet before installing anything.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Loud bang from the garage. That’s the sound of a spring snapping under full tension. The door won’t open afterward, and running the opener risks stripping the motor’s gears or pulling cables off their drums.
- Door opens a few inches then stops. The spring can’t counterbalance the door’s weight, so the motor hits its force limit and reverses. Continuing to push the button overheats the opener and shortens its life.
- Visible gap in the spring coil. A two-inch gap in a torsion spring means it has broken clean through. You’ll often see it if you look up while the door is closed, before you try to operate anything.
- Door feels heavy when you pull the manual release. A balanced door should lift with one hand and stay in place at the halfway point. If it feels like lifting weights or drops when you let go, the spring has lost tension.
- Garage door leans to one side while opening. Uneven spring tension pulls one cable tighter than the other, which torques the door. If left for a week or two, the track bends and the repair bill grows beyond just springs.
Our Process, Step by Step
- 1
You call, a person answers. A live Bramwell team member picks up any time of day or night at (213) 996-0290. We ask about your door type, the symptoms, and schedule a visit in a real arrival window that fits your day.
- 2
We inspect and diagnose. The technician arrives in uniform within the promised window and checks the spring type, cycle rating, cable wear, drum condition, and door balance. We weigh the door and confirm the correct spring spec before quoting.
- 3
You get a written price. The full cost of the spring repair, listed line by line, is on paper in front of you before any work begins. The number you approve is the number on the invoice, no exceptions.
- 4
We complete the repair and test. Springs are replaced or adjusted, then the door is run through a full cycle multiple times. We check the balance at three positions, confirm the opener’s force settings are correct, and lubricate the rollers and hinges.
- 5
We leave the site clean and explain the guarantee. The work area is swept, tools are packed, and we walk you through exactly what the 365-Day Done Right Promise covers in writing before we leave.
How Much Does Garage Door Spring Repair Cost in Los Angeles?
Most spring repairs in Los Angeles run $210 to $400, parts and labor included. A single extension spring replacement on an older door sits at the lower end, around $210 to $280, while a torsion spring pair replacement on a heavy double door lands closer to $330 to $400. The factors that move the price are spring cycle rating, door weight, and whether the cables and drums also need replacement.
What affects the price most is the spring’s cycle count. A 10,000-cycle spring costs less than a 20,000-cycle one but fails in half the time. We show both options on the written quote and recommend the higher-cycle spring for daily-driver doors. To avoid overpaying, be wary of lowball quotes that don’t include both springs or that push a full door replacement when a spring is all that failed. Our free estimate includes the complete diagnosis, the written price, and a breakdown of what’s covered by the Kingswell Guarantee. No work starts until you approve the number in writing.
Our Service Area Near Los Angeles
We serve homeowners across Los Angeles and the surrounding neighborhoods, including Santa Monica, West Hollywood, Beverly Hills, Studio City, Inglewood, Culver City, Venice, West Los Angeles, and South Gate. Our garage door spring repair service in Van Nuys and North Hollywood spring repair team cover the Valley side with the same written-price standard. For a full breakdown of what we do, visit our home page. Most spring jobs in central Los Angeles are completed the same day you call.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Garage Door Spring Repair in Los Angeles
Garage door spring repair is the replacement or adjustment of the coiled springs that counterbalance your garage door’s weight, allowing the opener or your arm to lift it easily. It includes inspecting the spring, sizing a replacement correctly, installing it, and confirming the door is balanced. In Los Angeles it’s the most frequent garage door repair we’re called for.
Most spring repairs take 45 to 90 minutes from arrival to finished test. A standard torsion spring pair replacement runs about an hour, while extension spring jobs on older Los Angeles doors run slightly faster. If cables or drums need replacement at the same time, add 30 minutes to the visit, and we’ll tell you that before starting.
Expect to pay $210 to $400 for a spring repair in Los Angeles, with most standard torsion spring replacements landing between $260 and $340. The quote includes parts, labor, and balancing. Call (213) 996-0290 for an exact quote, the estimate is free and in writing before any work begins.
Yes, we’re authorized to service LiftMaster, Chamberlain, Genie, Raynor, Clopay, Amarr, Wayne Dalton, and Craftsman systems. We stock common LiftMaster and Chamberlain opener parts on our trucks, and our spring work is always matched to the opener’s force settings. Your door gets balanced to the opener’s spec, not just given a new spring.
In most cases, yes. We keep same-day availability for spring failures across Los Angeles because a broken spring means a car trapped in the garage or a door that won’t secure. Call (213) 996-0290 and a live person will give you a real arrival window, not a four-hour range.
Every spring repair includes the 365-Day Done Right Promise in writing. If the repaired spring fails within a year of service under normal use, we return and fix it at no charge. The written Kingswell Guarantee also covers the workmanship, and we explain the exact terms before you pay anything.
Clear the area around the garage door track and pull vehicles out of the garage if the door can be opened manually. If the door is stuck closed, that’s fine; we work around it. Have your garage door opener remote handy, and if you know the door brand or approximate year, it helps us bring the right spring spec on the first trip.
Schedule Your Garage Door Spring Repair Service in Los Angeles Today
A broken spring won’t fix itself, and every day it’s left alone puts strain on your opener and door hardware. Call (213) 996-0290 for a free, no-obligation estimate on garage door spring repair in Los Angeles. A real person answers, we schedule around your day, and the written price is in your hand before any work begins.
Written by Marcus Ellery, Owner at Bramwell Garage Doors Los Angeles, serving Los Angeles since 2001.